Wireless 3-5KM 300Mbpcs CPE for IP HD camera tranmission bridge
ST5816H
Specs.pdf
ST5816H
User Manual.pdf
Introduction:
ST5816H is an outdoor IP67 wireless transmission bridge with
integrated antenna and RF module design for 10km. Its actual
testing data rate 60Mbps for 10km. ST5816H supports AP, Routing
Mode, WDS, Repeat Mode to do PTP and PTMP transmission. IP67 grade
support waterproof, dustproof and salt-spray proof.
Features:
Brief English operation interface
Support 10km distance LOS
Built-in 18db 5Ghz dual-polarized antenna
Transmit Power up to 27dBm
Receiving sensitivity up to -90dBm
Double Ethernet Interface
IP67 Waterproof grade
DC12-24V POE power supply
Plug to Play installation
Support frequency scanning tool to scan the around channel.
Support distance setting to avoid interference in same area
Parameters
| Item | Description |
| Hardware Parameter |
Interface | 2*10/100M Ethernet port 1*Main Ethernet port 1*Sub Ethernet port |
| POE power supply |
| Indicator light | Power state light |
| 4 grade signal strength light |
| LAN light |
| MODE light |
| Working frequency | 5.125-5.850GHz |
| Standard | IEEE 802.a/n |
| RF power | Max 27dbm (500mw), Adjustable by software |
| Rate | Max 300Mbps |
| Modulation | 802.11n: 2x2MIMO |
| 802.11a: OFDM, 6Mbps/-95dBm |
801.n MCS0: -88dBm MCS7: -73dBm |
| Antenna | Built-in dual polarization 18dbi antenna Horizontal: 30 degree Vertical: 30 degree |
| Reset | Support hardware/software reset |
| RAM | 64MB |
| FLASH | 8MB |
| Size | 270*270*70mm |
| Weight | 1.2kg |
| Input voltage | Wide voltage input DC 12V-24V |
| Power | ≤8W |
| Waterproof grade | IP67 |
| Working temperature | -30℃～+70℃ |
| Saving temperature | -20℃～+80℃ |
| Working humidity | 0～100% |
| Software |
| Working mode | Route mode: Client replaces all terminal authentication |
| Bridge mode: All terminals need to be separately certified |
| WDS | Support |
| Network protocol | PPTP, L2TP, IPsec
|
| PPPoE |
| DHCP Client/Server |
| NAPT, NTP |
| VLAN setting |
| Wireless function | Peripheral site detection/ Channel scan |
| Priority AP Connection Setting Binding (BSSID) |
| Channel Auto selection |
| Security policy | Encryption: WEP, TKIP, AES
|
| Wireless safety: Open system, shared key WPA/WPA-PSK,
WPA2/WPA2-PSK, 802.1x(PEAP, TLS, TTLS), WAPI |
| Authentication function | WEB account/ password PPPOE access authentication Route mode Client replaces all terminal authentication Bridge mode All terminals need to be separately certified Multi-user prtal authentication separately Multi-user prtal authentication separately |
| Network protection | Firewall |
| Support network rate-limiting |
| MAC address visiting control |
| System service | Support virtual DMZ, port forwarding. |
| Support UPnP Automatic port mapping |
| Support VPN unvarnished transmission(PPTP, L2TP, IPSec) |
| Configuration Management | Based on WEB, CPE built-in WEB server |
| Remote software update(HTTP) |
| Support Telnet connect |
| Support syslog system record |
| Support SSH service |
| Troubleshooting | Automatically detect network status and automatically reconnect
after disconnection |
Application:
