Zero Latency HD Video Downlink and Data Uplink
Specs Sheet
User Manual
Introduction
All professional UAV HD applications now share the same requirement
– a robust wireless HD video downlink. SUNTOR, delivers excellent
HD image quality, zero latency, and the highest levels of
robustness. SUNTOR employs TDD-COFDM technology, widely regarded as
the industry standard in the broadcast and cinematography markets
for UAV. It’s 2.4GHz radio, 2×2 MIMO and software manual channel
selection ensures resilient data connectivity, free from
interference, specifically from UAV controls links. The
zero-latency transmission offers live, real-time imaging for
broadcast, inspection, and mission critical applications. SUNTOR’s
all-in-one features supports RC, Pixhawk and HD Video transmission
into one link. Simply Plug-and-Fly!
SUNTOR ST20NPT is the Perfect tool for High end Drone and long
range transmission application(20km), allowing a Zero delay with
Mavlink gimbal controls and the ability to keep the live link in
very noisy environments surrounded by other Drones and wireless
communications.
Key Features
- True full HD 1080P at 60fps
- Long range 65,600ft/20,000m range (LoS)
- Zero latency, real-time video
- Stability boost mode with 4/8Mhz channel bandwidth
- Extremely resilient 2.4GHz. digital link with AES 256
- Encrypted and secured
- Supply TTL serial data interface for
- Gimbal control over Futaba® S.Bus
- Plug-and-Fly, out of the box setup and operation
Applications
- Aerial video production and cinematography
- Industrial and commercial inspection
- Surveillance and security
- Real estate assessment and supervision
- Search and rescue
- First responder situation evaluation
- Crowd control
- UAV enthusiast recreation
Power On
After checking all the connections are in good condition, turn on
the the IP Camera, PC, transmitter and receiver. The indicators
will bright and the whole system starts work.
TX Indicators Definition
After powering on, the devices will boot normally. Then the
indicators’ normal state will be as follows:
(1) Indicator light 1, 2, 3 and 6 will turn on in green color.
(2) After one second, indicator light 1(green), 2(green), 3(green)
and 6(blue) will start to blink.
(3) After the startup completed, indicator light 1(green),
2(green), 3(green), 5(green) and 6(blue) will keep constant bright.
Indicator light 4(red) will blink frequently.
RX Indicators Definition
When the device begin to normally start work, all indicators status
is described as follow:
1) After powering on, light 1,2,3 turn green, light 6 turns blue
and light 8 turns red.
2) After 1 second, light 1(Green), 2(Green), 3(Green) and 6(Blue)
start to blink. Light 5 (Green) and 8(Red) will keep constant
light.
3) After the starting completed. Light 1(Green), 2(Green),
3(Green), 4(Red), 6(blue) and 8(Red) will keep constant bright. By
the way, when you use the the ETH1, 7 (Green) will blink
frequently.
| CRITERIA | SPECIFICATION |
| Distance (Outdoor) | 65,600ft/20,000m range (LoS) |
| Transmission Delay | No delay(Not video compression) |
| Radio Frequency | 2.402-2.482 GHz |
| Channel Selection | Manual frequency selection
(Ensure the data transmission stable) |
| Video Formats | 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p25,1080p/24,
720p/60, 720p/50, 525i/60, 625i/50 |
| Encryption | AES-256 |
| Operating Temperature | -45~+85 Celsius |
| CRITERIA | AIR UNIT | GROUND UNIT |
| Video Interface | Mini ETH | Mini ETH |
| Data | TTL | TTL |
| Antenna Connectors | SMA*2 | SMA*2 |
| Power Connector | XT30PW-F | XT30PW-F |
| Power Switch | Pull-type switch(4Pin) | Pull-type switch(4Pin) |
| Power Input | DC7-18V | DC7-18V |
| Dimensions | 76*73*24mm | 68×48x15mm |
| Weight | 146g | 68g |
Package List
